strength testing equipment

... 1. Leather Material Tensile/ Flexing/Tearing Strength Testing Equipment/Machine Usage: Tensile test, flexing test, tearing test and so on. Standards: Most internation standards including ISO, ASTM and so on. Application: Leather fabric Materials 2.

... clause 8.8, GB9706.1-2007 clause 21, IEC60601-1:2020 clause 9.4.4, GB9706.1-2007 clause 21 and IEC61010-1 clause 7.5.2. It’s applied to test the strength of handle or grip for lifting or carrying the equipment. 2. Standard IEC62368-1:2018 Audio/video,

...Strength Test Equipment 5KN With Computer Display Design standard: ASTM D3330 FINAT GB/T2792. Uses: Bend / Peel / Tensile Strength Test Equipment is designed specially for the adhesive industry. Used to testing peeling strength with different methods. It can perform the 180&90 degree, T-shape peeling test and tensile,shearing & spliting strength test with different clamps. KeJian tensile strength...

...testing compressive strength of corrugated paper and kraft paper. It can be used to test marginal pressure strength, agglutination intensity. This machine can also do flat crush strength test, compression resistance test, Sticky degrees test as well as

...Strength Test Equipment Paper Box Compression Testing Machine Product Description Paper tube compressive testing testing machine is used for measuring the pressure strength of cartons,containers,etc, for inspecting the pressure-resistance and strike-endurance of packing materials during transportation or carry. Characteristics: 1.Paper tube compressive testing...

... for raw paper, corrugated cardboard, leather, cloth and synthetic leather. This tester is fully automatic-type rupture strength tester, Just put into the testing material, the tester automatically detect, automatic testing, automatic hydraulic recoil and

..., apparel, fabric, tape paper products, pharmacy and so on, for tensile strength, tear resistance, peel strength, bend strength, shear force , ect with different fixtures according to national and international standards customer required. Usage Used for

... Weld Strength Test Equipment Equipment description: Plastic door and window weld strength testing machine is mainly used to measure the position of the fracture strength of the corner windows. It has a simple structure, easy operation, testing accuracy, ...

...Testing Machine , Shoe Sole And Upper Peel Strength Testing Equipment Introduction: GB/T30903.3 Shoe sole and upper peel strength testing machine is suitable for checking into a shoe sole and upper peel strength between, the principle is fitted shoe shoes will become clamped in the machine to peel knife to peel the sole and upper junction, when measured peel is the force required to peel strength, peel strength...

...various materials, semi-finished products and finished products. It can be used for stripping, tearing, bending, and compression tests.It is suitable for metal, plastics, rubber, textiles, synthetic chemicals, wire and cable, leather and other industries.

..., shearing force, adhesion, peeling force, tear strength, etc of specimen, semi-finished and finished products in the field of rubber, plastic, metal, nylon, fabric, paper, aviation, packing, architecture, ...

...IEC60245.2 clause 22.7. It is used for checking mechanical strength of completed flexible cables. This cable tester consists of a carrier C (see IEC60245-2 Figure 1),a driving system for the carrier and four pulleys for each sample of cable to be tested.

... (UTM), is an electromechanical test system that applies a tensile (pull) force to a material to determine the tensile strength and deformation behavior until break. Usage compression spring tester is to test the tensile strength, compressive strength and

...Strength Testing Equipment for IEC884-1 Standard Standard: Designed in accordance with the relevant standards of GB2099.1, IEC884-1 and other electrical accessories, it is mainly used to detect the maximum force required when the plug is withdrawn from the socket and the required force for pulling out the single-pole plug from the socket assembly. The main test is the two-pole 10A, three-pole 10A and 16A test plugs and 10A, 16A test

...toy three times at a steady speed of 2.0±0.2m/s perpendicularly into a non-resilient step with a height of (50±2)mm. Principle: The ISO daynamic strength testing equipment simulates the running performance of the toy scooters with a load. The load is

... testing of various kinds paper boards ,single & multi layer corrugated paperboard as well non-paper material like silk, cotton etc. Put the testing specimen, the machine will automatically detect, testing, oil pressure return ,calculating, storing &

Dynamic Strength Testing Equipment 2 m/s Tester For Wheeled Ride On Toys Product Introduction Application: This Dynamic Strength Tester is mainly used to test the dynamic strength of wheeled ride-on toys. Can simulate driven toys vertically hit the ...